Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color- coding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas. Scotch® Tape 35 operates over a wide range of temperatures – up to 221°F (105°C); applies smoothly and conforms well above 32°F (0°C). This tape is available in nine fade resistant colors.
Color coding for phase identification, job identification and safety
Insulating electrical wiring
Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather
Scotch® Heavy Duty Mining Tape 31 has a tough, abrasion-resistant backing for jacket repair on mining cables. Due to the extremely abrasive environment, the original jacket on the cable gets damaged often and needs to be repaired. The tape is flexible, and the self-healing property of the mastic helps keep out moisture. Scotch® Mining Tape 31 is approved by MSHA (Mining Safety & Health Administration) as the outer jacketing of the 3MTM Mining Cable Splice Kits 3100 Series. The tape is printed with the MSHA logo.
Repair of mining cables and outer jacket of mining cable splice kits.
ScotchTM 23 Electrical Tape is a highly conformable self-fusing EPR (Ethylene Propylene Rubber) based, high voltage splicing tape. It is a non-vulcanising, shelf-stable tape with excellent electrical properties. 23 Tape can be used as an insulation for low-voltage applications as well as an insulation for splices up to 69kV.
Primary electrical insulation for splicing cable from 600V to 69kV on all solid dielectric cables.
Primary insulation for building stress cones on cables up to 35kV on all solid dielectric cables.
Jacketing on high-voltage splices and terminations.
Scotch® Vinyl Electrical Tape Super 88 is a premium grade, 8.5-mil thick, all-weather vinyl insulating tape. It is designed to perform continuously in ambient temperatures up to 105°C (220°F). The tape is conformable for cold weather applications down to -18°C (0°F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion and varying weather conditions. The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Scotch® Tape Super 88 is an Underwriters’ Laboratories Listed and Canadian Standards Association Certified “Insulating Tape.”
Primary electrical insulation for all wire and cable splices rated up to 600 volts and 105°C (220°F)
Primary electrical insulation for 600-volt bus applications, and protective jacketing for high- and low-voltage bus
Protective jacketing for high-voltage cable splices and repairs
Scotch® Rubber Mastic Tape 2228 is a conformable self–fusing rubber electrical insulating and sealing tape. Scotch® Rubber Mastic Tape 2228 consists of an ethylene propylene rubber (EPR) backing coated with an aggressive, temperature–stable mastic adhesive. The tape is made 65 mils (1,65 mm) thick for quick application build–up. It is designed for electrical insulating and moisture sealing applications. Scotch® Rubber Mastic Tape 2228 can be used on copper or aluminum conductors rated at 90°C, with an emergency overload rating of 130°C. It offers excellent resistance to moisture and ultraviolet exposure and is intended for both indoor and weather exposed outdoor applications.
• Primary electrical insulation for cable and wire connections rated up to 1000 volts. • Electrical insulation and vibration padding for motor leads rated up to 1000 volts.
• Primary electrical insulation for bus bar connections rated up to 35kV (3M drawing2047B–106)
• Padding for irregular shaped bus bar bolted connections.
• Moisture seal for cable and wire connections.
• Moisture seal for service drops.
• Moisture seal for ground wire and rod connections
• Jacket seal on power cable applications
Scotch® Super 33+TM Vinyl Electrical Tape is a premium grade, 7 mil thick, all-weather vinyl-insulating tape. It is designed to perform continuously in ambient temperatures up to 105°C (220°F). The tape is conformable for cold weather application down to -18°C (0°F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion and varying weather conditions (including ultraviolet exposure). The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Scotch® Super 33+TM Vinyl Electrical Tape is UL Listed and is a Canadian Standards Association (CSA) Certified “Insulating Tape.”
Primary electrical insulation for all wire and cable splices rated up to 600 volts and up to 105°C (220°F).
Primary electrical insulation for 600 volt bus applications, and protective jacketing for low and high voltage bus.
Protective jacketing for high voltage cable splices and repairs.
3M Glass Cloth Electrical Tape 69 with Silicone Pressure-Sensitive Adhesive
3M Glass Cloth Electrical Tape 69 is a white glass cloth tape with a high- temperature thermosetting silicone pressure-sensitive adhesive. It is designed for use in 600-volt dry location applications motors, and transformers with and without varnish coating. Key attributes like high mechanical strength and resistance to high temperatures provide excellent performance. The thermosetting adhesive provides an increased bond once applied in areas of high ambient temperatures. The thermosetting adhesive provides elevated temperature performance up to Class N 392°F (200° C) temperature rating.
This tape provides insulation and solvent-resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation. This tape features a non- corrosive adhesive. It is conformable, printable and flame retardant.
3M Diamond GradeTM Conspicuity Markings Series 983
3M Diamond GradeTM Conspicuity Markings Series 983 are bright and durable, helping drivers avoid incidents and accidents night after night.
With an easy-to-install, yet high-performance adhesive, these markings keep your trucks and trailers visible for the long-haul. The vivid colours and high reflectivity are protected by an 8 year warranty. That’s safety you can count on.
Scotch® Fire-Retardant Electric Arc Proofing Tape 77 Series
Scotch® Fire-Retardant Electric Arc Proofing Tape 77 Series are designed to protect most types of electrical cables from fault arc-generated heat and flames of nearby cable failures. These elastomeric tapes are formulated to generate a thick, insulating charred buildup when exposed to high temperatures. The insulating charred buildup protects wrapped cables and cable accessories from the fault arc-generated heat and flames of cable failures within approximately 20 inches until limiting devices can interrupt the faulted circuit.
To arc proof high-energy power cables that may be exposed to arc-fault generated heat and flames from nearby failures of other high-energy cables (any cables within 20 inches are considered to be exposed)
To arc proof control cable when high energy power cables are present
To provide additional electrical insulation, thus reducing possibilities of transferred